Mid September Already ! Fall Is In The Air ?

Not with 90 degree temps and 100% humidity !  Ick !  It'll come though but not soon enough !  lol !  

It's been an interesting week with a bum hand.  lol !  I actually know how to get along with a bum hand fairly well.  I've had 4 surgeries between both over the years.  lol !  Still it really isn't alot of fun.  Thankfully, no surgery involved here.  Feels like a sprain even though I don't recall hearing the telltale "pop" when you sprain something.  I can't get into ortho doc for another week so will have to wait til then to get "official" diagnosis.

With the painful hand, my crafting anything has, let's say, dwindled.  Still, I had to give something a try.  Got out the loom and got started.  I warped it with the new C-Lon size D colored thread I got.  Hmmmm, began warping and thought wow, the thread feels very weak to be doing that sort of beading but I continued and finished up the number I needed.  Started to bead and it just wasn't working out well at all.  Keep in mind, I'm using Dyna-Mites size 11 seed beads.  It was hard to manipulate these particular beads using this particular thread. I thought maybe it's just my bum hand getting in the way but I found later it was not.  The tension wasn't there either no matter what I did which I though quite odd.  Finally, after adding about 3 or 4 rows that took a VERY long time to work, I had enough.  Took it all apart and started over with the Silamide thread.  No problem at all.  So just maybe, the C-Lon size D thread just isn't going to work well FOR ME using the Dyna-Mites seed beads.  I know alot of people use it for looming but alot of people use other types of seed beads too.

As I was beading on the loom, my hand was starting to bother me so when the pain got too bad, I just quit which meant, not much got done in a week.  lol !  You can see in the photo below just how much DID get done in 5 days.  lol !  It's almost 3 inches and it felt like a foot !  lol !  I'll just do what I can when I can.   

Cool, fall weather is not too far off now and so the days for beading on a loom are becoming numbered !  I'll be back at my trusty torch very soon melting glass into beads and I am VERY VERY anxious to do just that.  :)   It seems like FOREVER that I've put in some good time creating with glass and I surely have missed it !  I'll still play on the loom or make a braid or piece of jewelry on days I can't torch.  I'll have to cause I just ordered a bunch more seed beads !  lol !  Making beads is my first love though soooooo...............

Time for me to start my day.  Thanks so much for coming by !  I hope you come back again soon !

        

Beading With A Loom - A New Journey

No wasting time, I'll just get right to it.  :)  Playing with my new loom this past week was fun !  So VERY different from my first experiences with that cheapie loom.  Thing is, that cheapie loom is supposedly meant for kids.  I don't know.  Maybe a kid can manipulate it better ?  Whatever the case may be, it lead me to a search for a loom and so far, the one I got, is the right pick.  I don't plan on becoming a master at this art form.  I had an interest in it as I do with everything to do with beads so decided to try it.  I love a good challenge and the end result - good or bad.  :)  It's all a learning experience and I love the process and the outcome.  So onward and upward as it were. 
Below are my thoughts on this particular loom.  Hopefully down to the tiniest detail I myself find important.  Lots of photo's included.  :)

I've actually made a couple of lists - Likes and Dislikes.  These are ONLY MY opinions.  Please keep that in mind.   I'll start with the Likes.

- The 8x10 size is perfect for my needs.  Not too big and not too small.

- The top of the loom sits higher than the bottom of the loom which makes it a bit easier to work.  Photo below shows side view.

 

- Space under the warp threads- at the front of the loom (lower end) 4 3/4"  and at the back of the loom (higher end) almost 6 3/4".  There is plenty of room under the threads for my hands to fit easily.

- There are bead cups included in the bottom of the loom which is a nice little extra if needed.  This particular loom has 4.

- There are plenty of nails at both ends to tie off the warp threads.  5 to be exact for a total of 10.

- Tightening and loosening the threads for tension is fairly easy with the wing nuts at both ends of front and back rods.  I found you don't need to hold the loom or brace it to do either.  See first photo, side view.

- The wood on the loom is smooth.  No splinters, no cracks, etc.  Well made.

- Very sturdy. 

- The price is right ! 

Ok, the Dislikes List.  Remember, this is just MHO.

- Minor but irritating - came packed in shredded paper !  What a mess.  The loom itself was wrapped in a bit of bubble I think. 

- Directions that are included on how to use the loom are sparse and incomplete - for a beginner.  I realize there is tons of free info online but this was noticeable.  There are a couple drawings rather than photo's on those directions.  To be fair, on their website, they do have photo's of how to warp the threads and a few on how to bead.  There are better instructions on you tube.

- The loom itself is very well made however it needs to have the option of adding legs so it can stand higher if the buyer wants or needs that.  Here you can see I've added a roll of shelf liner to the higher end to bring it up even more.  I personally need this height and it really worked very well for me.  :)

- The steel warping bars on each end need to be removable so one may have the option to add other warping methods.  I know this might not be possible with this particular loom but it is a thought.  The reason I say this is because even though size 8/0 beads can be used, there is a lot of gap between them when adding the beads so one MUST pull hard to bring the threads and beads together.  Still the thread does show in between the beads.  See photo below of brightly colored strip.

- I found that as I was beading, my arms tended to rest on the steel bar at the lower end.  That is a problem I need to figure out myself.  lol ! 

- There should be something included in the deal to stabilize the bottom of the loom.  If using on a smooth surface, it slides ALOT.  I solved this problem by using shelf liner.  I bought a whole roll thinking I'd use the rest on my kitchen shelves.  Well as you can see in the photo above, it now has another use !  lol !  It won't go on the shelves afterall.  :)  The liner I got has holes in it.  The surface is not smooth which gives it better grip on both sides. 

  

- Warping the loom was nearly as hard for me as it was with the cheapie loom.  That said, at least it was somewhat easier to manipulate the threads to tie them off vs. the cheapie flat loom.  There needs to be a better way to tie off the ends of the threads on these looms PERIOD.  :) 

My overall impression of this particular loom -  It's a great loom - for me, as a beginning loomer (is that a word - lol !).   I would highly recommend it to anyone.  Let's face it, anyone can have any number of likes and dislikes about any particular loom but I feel this particular one would be and is great for the masses.  :) 

In the end, this is how I use my new Loom:  Yeah, I gotta use a magnifying glass and it's on a stand and it's adjustable.  Makes my life a whole bunch nicer especially when working with those darned tiny 11/0 beads !  Man, that was a chore but I did it !  :)

The photo below shows the two strips I made with this loom.  The strip on the left is 11/0 beads in drk bronze and cream soda.  I did not follow any pattern at all. Just went for it and that's how it ended up.  I'm happy.  :)  The bright colored one is a followed pattern using 8/0 seed beads.  Something else I learned quickly.  You gotta have the right needle for the beads used and the right thread to be able to pass through the beads.  All that will come in another post.  Lots to talk about.  lol !  As for the two unfinished strips, I have no idea what I'm going to do with them.  Maybe bracelets, maybe for a collage, I just don't know.  We shall see......................

 

I've decided to go ahead and add the name of the shop where I got the loom.  I figure I might as well because I'm quite happy with it so why not promote it publicly ?  The place is www.beadlooms.com  They have a special going on for this particular loom right now - $5.00 off.  Also, they pack it up and ship it pretty quick too via USPS.    

That's all for this week.  Thanks so much for coming by.  I hope you come back again soon !  Since I still can't torch, I'll be posting more of my bead looming escapades soon.  :)